Engine Coolant Temperature Sensor Replacement

GM4167390

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedures

Drain the cooling system. Cooling System Draining and Filling (Static Fill LWN)Cooling System Draining and Filling (GE 47716 LWN)
Remove the left side wheelhouse splash shield. Wheelhouse Splash Shield Replacement (Left Side)
Disconnect the air conditioning compressor electrical connector and reposition.
Disconnect the engine coolant temperature sensor electrical connector and reposition.

1

Engine Coolant Temperature Sensor

CAUTION:

Refer to Component Fastener Tightening Caution .

Tighten
15 N.m (11 lb ft)