FixVault
Home › Chevrolet › 2018 › Express 2500 Base, Van Cargo Extended, 2.8L Eng VIN 1 › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 2.8L (LWN) Diesel - Repair Instructions › Repair Instructions › Glow Plug Replacement › Installation Procedure

Installation Procedure

  1. GM4639258Courtesy of GENERAL MOTORS COMPANY

    Hand start the glow plugs (1) into the cylinder head. [4x]

      CAUTION:

      Refer to Component Fastener Tightening Caution .

    2. Tighten the glow plugs to 11 N.m (97 lb in).
  2. GM4639247Courtesy of GENERAL MOTORS COMPANY

    Diesel Glow Plug Wiring Harness (1) - Connect [4x]

  3. GM4639232Courtesy of GENERAL MOTORS COMPANY

    Diesel Fuel Separator (2) - Install

  4. Exhaust Temperature Sensor Bracket (3) - Install
    5. CAUTION:

    Refer to Fastener Caution .

  5. Auxiliary Heater Inlet and Outlet Hose Clip Nut (1) - Install and tighten [2x] 5.5 N.m (49 lb in)
  6. Fuel Injector Deadener Replacement  - Install
About FixVault