FixVault
Home › Chevrolet › 2018 › Silverado 1500 SSV, 4WD, Part Time T/Case Control, Gas › Repair and Diagnosis › Body & Frame › Towing Systems › Trailer Brake Controls System › Repair Instructions › Trailer Brake Power Control Module Replacement (JD9) › Installation Procedure

Installation Procedure

    Fig 1: Trailer Brake Power Control Module Component Location
    GM3268822Courtesy of GENERAL MOTORS COMPANY
  1. Install the trailer brake power control module (1).
    2. Fig 2: Trailer Brake Power Control Module Bolts
    GM3268818Courtesy of GENERAL MOTORS COMPANY
  2. Holding the trailer brake power control module nuts stationary, install the trailer brake power control module bolts (1) and tighten to 9 N.m (80 lb in).
  3. Connect the trailer brake power control module electrical connector.
  4. Raise and secure the spare tire and wheel assembly.
About FixVault