Fastener Specifications
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Steering Gear Bolt | |
|
110 N.m (81 lb ft) |
|
150 - 160 degrees |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Drivetrain and Front Suspension Frame Bolt Front | 160 N.m (118 lb ft) |
| Drivetrain and Front Suspension Frame Bolt Rear | 160 N.m (118 lb ft) |
| Front Compartment Insulator Bolt | 3 N.m (27 lb in) |
| Front Compartment Splash Shield Bolt | 3 N.m (27 lb in) |
| Front Wheelhouse Liner Bolt | 2.5 N.m (22 lb in) |
| Intermediate Steering Shaft Bolt | 34 N.m (25 lb ft) |
| Stabilizer Shaft Link Nut | 65 N.m (48 lb ft) |
| Steering Linkage Tie Rod Nut | 35 N.m (26 lb ft) |
| Transmission Front Mount Bolt | 100 N.m (74 lb ft) |
| Transmission Rear Mount Bracket Bolt | 100 N.m (74 lb ft) |
| Underbody Brace Bolt | 100 N.m (74 lb ft) |