Parking Assist Sensor Learn Calibration: Calibration
WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
The calibration process for the Parking Assist system is necessary when a parking assist sensor has been replaced or improperly learned.
To calibrate the Parking Assist sensors:
- Select Parking Assist Sensor Learn
in the scan toolNOTE: Parking Assist Sensors should be at or near room temperature
- Operate the vehicle in the following conditions until the calibration is complete:
- Nothing is within 50cm of the parking assist sensors
- Ensure the parking assist sensors are clean
- Vehicle OFF, scan tool disconnected, all doors closed, all accessories OFF, open and close driver door. It may take up to 2 min for all vehicle systems to power down.
- Verify Parking Assist system is operating correctly and there are no DTCs set.