Fastener Specifications
WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
| Application |
|---|
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal.
|
| Front Brake Caliper Piston Boot |
| Front Brake Caliper Piston Seal |
| Front Brake Hose Washer |
Single Use Threaded Fastener/Component Tightening Specifications
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal.
|
|
| Brake Caliper Mounting Bracket Bolt | 97.5 N.m (72 lb ft) |
Reusable Threaded Fastener Tightening Specifications
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners listed in this table can be reused after removal.
|
|
| Brake Caliper Bleeder Valve | 8.5 N.m (75 lb in) |
| Brake Caliper Guide Pin Bolt | 28 N.m (21 lb ft) |
| Brake Hose Fitting Banjo Bolt | 40 N.m (30 lb ft) |
| Brake Rotor Screw | 4 N.m (35 lb in) |
| Disc Brake Splash Shield Bolt | 4 N.m (35 lb in) |