FixVault
Home › Chevrolet › 2018 › Suburban 3500 HD LS › Repair and Diagnosis › Body & Frame › Windows › Fixed And MOVEABLE Window System › Diagnostic Information And Procedures › Rear Window Defogger Malfunction › Circuit/System Verification

Circuit/System Verification

  1. Ignition - On / Vehicle - In Service Mode
  2. Verify the scan tool parameter:Rear Defogger Switch=Off
    • If not the specified state 

      Test or replace the component:P17 Info Display Module

    • Go to next step: If the specified state 
  3. Operate the component:Rear Defogger Switch - Pressed

    Verify the scan tool parameter:Rear Defogger Switch=On

    • If not the specified state 

      Test or replace the component:P17 Info Display Module

    • Go to next step: If the specified state 
  4. Perform the scan tool control function:Rear Defogger - On and Off

    Verify the component turns On and Off:E18 Rear Defogger Grid

    • If the component does not turn On and Off 

      Refer to: Circuit/System Testing

    • Go to next step: If the component turns On and Off 
  5. All OK.
About FixVault