Removal Procedure

Place the ignition switch in the OFF position.
Remove Brake Pressure Modulator Valve. Refer to Brake Pressure Modulator Valve Replacement
Remove Brake Pressure Modulator Valve Bolt (1)

Fig 1: Brake Pressure Modulator Valve Bolt
Courtesy of GENERAL MOTORS COMPANY
Remove Brake Pressure Modulator Valve Bracket (1)

Fig 2: Brake Pressure Modulator Valve Bracket
Courtesy of GENERAL MOTORS COMPANY

NOTE: Do NOT pry on the accumulator caps on the underside of the brake pressure modulator valve.
Inspect the insulators for damage and replace, if necessary.