FixVault
Home › Chevrolet › 2018 › Traverse L › Repair and Diagnosis › Electrical › Instrument Panel System Displays And Gauges › Diagnostic Information and Procedures › Engine Oil Level Sensor Diagnosis › Circuit/System Verification

Circuit/System Verification

  1. Verify proper engine oil level.
    • If not at proper level 

      Add oil as necessary.

    • Go to next step: If at proper level 
  2. Ignition ON, verify the scan tool Engine Oil Level parameter reads OK.
    • If not OK 

      Refer to Circuit/System Testing.

    • Go to next step: If OK 
  3. All OK.
About FixVault