FixVault
Home › Chevrolet › 2018 › Traverse RS › Repair and Diagnosis › External Pages › Different car › Section 79 (Wiper System And Washer System) › Repair Instructions › Windshield Washer Solvent Container Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Traverse. However, it is still accessible from the selected car via links, so may be relevant.
  1. Headlamp - Left Side - Remove - Front Headlamp Replacement
  2. Place a clean suitable drain pan under the windshield washer solvent container area to recover the windshield washer solvent when the windshield washer pump hose and rear window washer pump hose are disconnected.
  3. GM4744736Courtesy of GENERAL MOTORS COMPANY

    Rear Window Washer Pump Hose (1)@Rear Window Washer Pump (2) - Remove

  4. Rear Window Washer Pump Hose (1)@Windshield Washer Solvent Container (3) - Remove
  5. GM4744725Courtesy of GENERAL MOTORS COMPANY

    Windshield Washer Pump Hose (1)@Windshield Washer Pump (2) - Remove

  6. Windshield Washer Pump Hose (1)@Windshield Washer Solvent Container (3) - Remove
  7. Disconnect all electrical connectors.
  8. Wiring Harness Connector Retainer @Windshield Washer Solvent Container - Disconnect [3x]
  9. GM4751069Courtesy of GENERAL MOTORS COMPANY

    Windshield Washer Solvent Container Bolt (1) - Remove [2x]

  10. GM4751068Courtesy of GENERAL MOTORS COMPANY

    Windshield Washer Solvent Container Nut (1) - Remove

  11. GM4751067Courtesy of GENERAL MOTORS COMPANY

    Windshield Washer Solvent Container (1) - Remove

  12. Empty the windshield washer solvent into a suitable clean container.
  13. Transfer components as necessary.
About FixVault