FixVault
Home › Chevrolet › 2018 › Volt Premier › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel System- - 1.5L (L3A) - Repair Instructions › Repair Instructions › Fuel Tank Replacement › Disassemble Procedure

Disassemble Procedure

  1. Fig 1: Identifying Fuel Tank Fuel Pump Components
    GM4091018Courtesy of GENERAL MOTORS COMPANY

    Retainer (2, 5, 7) - Remove

  2. Fuel Pump Fuel Feed Hose (8) - Remove- Plastic Collar Quick Connect Fitting Service 
  3. Remove the evaporative emission canister hose (1). Refer to Plastic Collar Quick Connect Fitting Service .
  4. Evaporative Emission Rear Hose (3) - Remove- Plastic Collar Quick Connect Fitting Service 
  5. Disconnect the electrical connector (6) and remove the fuel tank fuel pump module wiring harness (4).
  6. Fuel Tank Fuel Pump Module Replacement  - Remove
  7. GM4091019Courtesy of GENERAL MOTORS COMPANY

    Fuel Tank Heat Shield (1) - Remove

About FixVault