FixVault
Home › Chevrolet › 2018 › Volt Premier › Repair and Diagnosis › Engine Performance › Ignition System › Engine Controls And Fuel System- - 1.5L (L3A) - Repair Instructions › Repair Instructions › Fuel Level Sensor Replacement › Removal Procedure

Removal Procedure

  1. Fuel Tank Fuel Pump Module Replacement  - Remove
  2. Fig 1: Fuel Level Sensor, Fuel Pump Module, Retaining Brackets And Electrical Connector
    GM4091067Courtesy of GENERAL MOTORS COMPANY

    Disconnect the electrical connector. (1)

  3. Push the 2 retaining brackets (3) in direction of arrows.
  4. While holding the 2 retaining brackets (3) move the fuel level sensor (2) upwards and remove the fuel level sensor (2) from the fuel pump module (4).
About FixVault