FixVault
Home › Chevrolet › 2019 › Bolt EV LT › Repair and Diagnosis › Electrical › Charging Systems › 12 V Starting And Charging › Repair Instructions › Battery Distribution Fuse Block Replacement › Installation Procedure

Installation Procedure

  1. Battery Positive Post Terminal (2) @ Battery Distribution Fuse Block (1) - Install
    GM4546945Courtesy of GENERAL MOTORS COMPANY
  2. Battery Positive Cable (3) @ Battery Distribution Fuse Block (1) - Install
  3. Battery Distribution Fuse Block Nut (1) - Install and tighten 22 N.m (16 lb ft)
    GM4546944Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  4. Body Wiring Harness Connector (2) @Battery Distribution Fuse Block - Connect
    GM4546942Courtesy of GENERAL MOTORS COMPANY
  5. Body Wiring Harness Nut (1) @Battery Distribution Fuse Block - Install and tighten 5 N.m (44 lb in)
  6. Battery Tray Support (2) - Install
    GM4546927Courtesy of GENERAL MOTORS COMPANY
  7. Battery Tray Support Nut (1) - Install and tighten 9 N.m (80 lb in)
  8. Battery Positive Cable Protective Cover (1) - Install
    GM4546926Courtesy of GENERAL MOTORS COMPANY
  9. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection 
About FixVault