FixVault
Home › Chevrolet › 2019 › Bolt EV Premier › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Repair Instructions › Rear Wheel Speed Sensor Replacement › Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. Remove the rear tire and wheel assembly. Tire and Wheel Removal and Installation
  3. Rear Wheelhouse Liner (4) - Remove - Rear Wheelhouse Liner Replacement
    GM4533721Courtesy of GENERAL MOTORS COMPANY
  4. Rear Wheel Speed Sensor Bolt (1) @ Rear Brake Caliper Mount Plate - Remove
    GM4514610Courtesy of GENERAL MOTORS COMPANY
  5. Rear Wheel Speed Sensor (2) @ Rear Brake Caliper Mount Plate - Remove
  6. Rear Wheel Speed Sensor Wiring Harness (1) @ Rear Axle Mounted Bracket (2) - Unclip
    GM4514611Courtesy of GENERAL MOTORS COMPANY
  7. Rear Wheel Speed Sensor Wiring Harness (1) @ Underbody Rear Side Rail Mounted Bracket (2) - Unclip
    GM4514612Courtesy of GENERAL MOTORS COMPANY
  8. Rear Wheel Speed Sensor Wiring Harness (1) @ Rear Wheelhouse Panel Mounted Bracket (3) - Unclip
  9. Rear Wheel Speed Sensor Electrical Connector (1) @ Body Wiring Harness (2) - Disconnect
    GM4514613Courtesy of GENERAL MOTORS COMPANY
  10. Rear Wheel Speed Sensor @ Vehicle - Remove
About FixVault