Fastener Specifications
WARNING: This page is about a different car, the 2018 Chevrolet Bolt EV. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
| Application |
|---|
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
| Front Brake Caliper Piston Boot |
| Front Brake Caliper Piston Seal |
| Front Brake Hose Washer |
| Rear Brake Hose Washer |
Single Use Threaded Fastener/Component Tightening Specifications
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
| Front Brake Caliper Bracket Bolt | 160 N.m (118 lb ft) |
| Rear Brake Caliper Bracket Bolt | 100 N.m (74 lb ft) |
Reusable Threaded Fastener Tightening Specifications
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
| Front Brake Caliper Bleeder Valve | 10 N.m (89 lb in) |
| Front Brake Caliper Guide Pin Bolt | 40 N.m (30 lb ft) |
| Front Brake Hose Fitting Bolt | 40 N.m (30 lb ft) |
| Front Brake Rotor Bolt | 9 N.m (80 lb in) |
| Rear Brake Caliper Guide Pin Bolt | 35 N.m (26 lb ft) |
| Rear Brake Hose Fitting Bolt | 40 N.m (30 lb ft) |
| Rear Brake Rotor Bolt | 9 N.m (80 lb in) |