Installation Procedure

Accessory DC Power Control Module (1) - Install

Courtesy of GENERAL MOTORS COMPANY
Engine Wiring Harness Bracket (1) - Install [2x]

Courtesy of GENERAL MOTORS COMPANY
Accessory DC Power Control Module Bolt (1) - Install [2x] 22 N.m (16 lb ft)

Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .
Accessory DC Power Control Module Stud (2) - Install 22 N.m (16 lb ft)
Battery Negative Cable Extension Cable & Battery Positive Cable - Install

Courtesy of GENERAL MOTORS COMPANY
Battery Positive Cable and Nut (2) - Install and tighten 15 N.m (11 lb ft)
Battery Positive Cable Protector (3) - Install
Battery Negative Cable Extension Cable Fastener (1) - Install and tighten 15 N.m (11 lb ft)
Electric Differential Drive Motor Power Inverter Module Cooling Hose (3) - Install the Hose and Engage the Clamp (1)

Courtesy of GENERAL MOTORS COMPANY
Drive Motor Generator Control Module Cooling Outlet Hose (2) - Install the Hose and Engage the Clamp (1)
Low Voltage connection connector (1) - Connect @ Accessory DC Power Control Module

Courtesy of GENERAL MOTORS COMPANY
Auxiliary Power Module Connector (1) - Connect

Courtesy of GENERAL MOTORS COMPANY
Accessory DC Power Control Module High Voltage Connector Protector (5) - Install

Courtesy of GENERAL MOTORS COMPANY
Accessory DC Power Control Module High Voltage Connector Protector Bolt (4) - Install 9 N.m (80 lb in)
Accessory DC Power Control Module High Voltage Connector Protector Bolt (3) - Install 22 N.m (16 lb ft)
Accessory DC Power Control Module High Voltage Connector Protector Nut (2) - Install 9 N.m (80 lb in)
Install the battery to battery positive cable retainers.
Fill the drive motor generator power inverter module cooling system. Drive Motor Generator Power Inverter Module Cooling System Draining and Filling
Enable the high voltage system. High Voltage Enabling