Installation Procedure

Using a flat bladed tool, release the ECM bracket retainer. Slide the ECM and bracket assembly to the battery tray.

Courtesy of GENERAL MOTORS COMPANY
Engine Control Module (2) - Install

CAUTION:

Engine Control Module Bracket Nut (1) - Install and tighten [4x] 4.7N.m (42 lb in)
Engine Control Module Electrical Connector (1) - Connect

Courtesy of GENERAL MOTORS COMPANY
Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection
If replacing the engine control module, reprogram the module. Control Module References