Liftgate Release Switch Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement (Without ZR1)Rear Bumper Fascia Replacement (With ZR1) . Place the rear bumper fascia face down on a clean protected surface.
1	Liftgate Release Switch Procedure Depress the retainers (arrows) on the back side of the switch and push the switch out from the rear bumper fascia. Disconnect the electrical connector.

Callout

Component Name

Preliminary Procedure
Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement (Without ZR1)Rear Bumper Fascia Replacement (With ZR1) .
Place the rear bumper fascia face down on a clean protected surface.

Liftgate Release Switch

Procedure

Depress the retainers (arrows) on the back side of the switch and push the switch out from the rear bumper fascia.
Disconnect the electrical connector.