Installation Procedure
- Position a NEW intermediate steering shaft boot clamp (1) onto the intermediate steering shaft boot.
- Intermediate Steering Shaft Boot (1) Install
- Intermediate Steering Shaft (1) Install - Intermediate Steering Shaft Replacement
- Slide the intermediate steering shaft boot downwards and onto the steering gear.
- Use the DT-35910 pliers (1) to install the NEW intermediate steering shaft boot clamp.
- Install the left front tire and wheel assembly.TIRE AND WHEEL REMOVAL AND INSTALLATION
- Intermediate Steering Shaft Inner Boot (1) Install - Intermediate Steering Shaft Inner Boot Replacement
- Upper Intermediate Steering Shaft Install - Upper Intermediate Steering Shaft Replacement
- Floor Front Air Outlet Duct - Left Side Install - Floor Front Air Outlet Duct Replacement - Left Side
- Remove the CH-42640 Steering Column Anti-Rotation Pin (1) from the steering column lower access hole.