Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Remote Function Actuator Module (1) - Install
Secure the retaining tabs.
Connect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Route the seat belt webbing through the right side body lock pillar garnish molding (1).
Body Side Rear Window Garnish Molding-Right Side (1) - Install

CAUTION:

Quarter Window Trim Finish Panel Bolt-Right Side (2) - Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Reposition the right side rear seat belt retractor anchor plate (2) back under the rear floor panel carpet.
Rear Seat Belt Retractor Anchor Plate Bolt-Right Side (1) - Install and tighten - Fastener Specifications
Enable the SIR System. SIR Disabling and Enabling