Component Testing
- Ignition OFF, disconnect the harness connector at the appropriate S48 Multifunction Switch.
- Test for infinite resistance between the signal terminal and the ground terminal with the switch in the open position.
- If less than infinite resistance
Replace the appropriate S48 Multifunction Switch.
- Go to next step: If infinite resistance
- If less than infinite resistance
- Test for less than 2 Ω between the signal terminal and the ground terminal with the switch in the closed position.
- If 2 Ω or greater
Replace the appropriate S48 Multifunction Switch.
- Go to next step: If less than 2 Ω
- If 2 Ω or greater
- All OK.