FixVault
Home › Chevrolet › 2019 › Trax LS, AWD › Repair and Diagnosis › External Pages › Different car › Section 90 (Antilock Brake System) › Repair Instructions › Front Wheel Speed Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2770263

    Install the wheel speed sensor (1) to the steering knuckle.

  2. GM2770260
    CAUTION:

    Refer to Fastener Caution .

    Install the wheel speed sensor bolt (1) and tighten to 8 N.m (71 lb in).

  3. GM2770258

    Install the wheel speed sensor harness grommets (1) to the brake hose brackets.

  4. GM2770255

    Connect the wheel speed sensor electrical connector (1) and install the connector to the vehicle body.

  5. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  6. Perform the diagnostic system check. Refer to Diagnostic System Check - Vehicle .
About FixVault