FixVault
Home › Chevrolet › 2019 › Trax LT, AWD › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Generator Replacement (LUV) › Installation Procedure

Installation Procedure

  1. GM2777172Courtesy of GENERAL MOTORS COMPANY

    Install the generator (1)

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the 2 generator mounting fasteners (2) and tighten to 35 N.m (26 lb ft).
  3. GM2777174Courtesy of GENERAL MOTORS COMPANY

    Connect the generator wiring harness connector (4).

  4. Install the generator positive cable (3) and tighten the fastener (2) to 17 N.m (13 lb ft).
  5. Install the protective boot (1).
  6. Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement .
  7. Install the drivetrain and front suspension frame transmission protector. Refer to Drivetrain and Front Suspension Frame Transmission Protector Replacement .
  8. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (without KL9) Battery Negative Cable Disconnection and Connection (with KL9) .
About FixVault