Removal Procedure
- Rear Compartment Floor Stowage Trim Compartment Replacement - Remove
- Battery Negative Cable Disconnection and Connection - Disconnect
Remove the 3 panel trim nuts (1).
- Remove the panel trim (2).
Release the retaining tabs. (1)[2x]
- Battery Fuse Block Cover(2) - Remove
Remove the battery positive cable fuse block nut (2).
- Retainer(1) - Unclip[5x]
- Quarter Lower Rear Trim Panel Replacement (Left Side) , or Quarter Lower Rear Trim Panel Replacement (Right Side) - Remove
Retainer(1) - Unclip[11x]
- Center Pillar Lower Trim Panel Replacement - Remove
Retainer(1) - Unclip[3x]
For a better access, fold the floor carpet (2) aside.
- Remove the battery positive cable (1) from the left channel.
For a better access, fold the floor carpet aside.
- Retainer(1) - Unclip[3x]
- Dash Upper Extension Panel Opening Cover Replacement - Remove
- Windshield Wiper System Module Replacement - Remove
- Engine Wiring Harness Junction Block Replacement - Remove
Release the 2 retaining tabs to open the cover (1).
- Pull the battery positive cable (2) through the harness grommet into the passenger compartment.
- Separate the battery positive cable from the body harness.
- Remove the battery positive cable from the vehicle.