FixVault
Home › Chevrolet › 2019 › Volt Premier › Repair and Diagnosis › Electrical › Charging Systems › Battery, Starting And Charging System › Repair Instructions › Engine Wiring Harness Junction Block Replacement › Installation Procedure

Installation Procedure

  1. GM4091091Courtesy of GENERAL MOTORS COMPANY

    Push down the 3 electrical connectors (1) before installation of the engine wiring harness junction block.

  2. GM4091089Courtesy of GENERAL MOTORS COMPANY

    Install the engine wiring harness junction block (2):

    1. Lock the 3 retaining tabs (1) and the retaining tabs (4).
      2. CAUTION:

      Fastener Caution

    2. Tighten the 3 engine wiring harness junction block bolts (3) to 7 N. m (62 lb in).
  3. GM4091088Courtesy of GENERAL MOTORS COMPANY

    Install the 2 engine wiring harness junction block supply (2).

  4. Install the engine wiring harness junction block supply nut (1) and tighten to 15 N. m (11 lb ft).
  5. Install the engine wiring harness junction block supply nut (3) and tighten to 5 N. m (44 lb in).
  6. GM4091087Courtesy of GENERAL MOTORS COMPANY

    Install the cover (2).

  7. Check the locked tabs (1).
  8. GM4091086Courtesy of GENERAL MOTORS COMPANY

    Install the cover (2). Check the locked 3 plastic quick connect fitting tabs (1).

  9. Battery Negative Cable Disconnection and Connection  - Connect
About FixVault