Installation Procedure
WARNING: This page is about a different car, the 2018 Chevrolet Sonic. However, it is still accessible from the selected car via links, so may be relevant.
Front Brake Caliper Guide Pin- Lower (2) - Install
- Front Brake Caliper Guide Pin- Upper (1) - Install
Front Brake Caliper (2) @Front Brake Caliper Bracket - Install
- Front Brake Caliper Guide Pin Bolt (1) - Remove [2x ] 28 N.m (21 lb ft)
- Install the front tire and wheel assembly. Tire and Wheel Removal and Installation
- Lower the vehicle.
NOTE:
The upper brake caliper guide pin is equipped with a bushing and must be installed in the same location.
NOTE:
Install an open end wrench to hold the caliper guide pin in line with the brake caliper while removing or installing the caliper guide pin bolt.
CAUTION:
Refer to Fastener Caution .