FixVault
Home › Chevrolet › 2020 › Spark LS, Standard Trans › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 1.4L (LV7) - Repair Instructions › Repair Instructions › Engine Oil Pressure Sensor Replacement › Installation Procedure

Installation Procedure

  1. GM4035063Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Install the engine oil pressure sensor (2) to the engine and tighten to 35 N.m (26 lb ft).

  2. Connect the engine oil pressure sensor connector (1).
  3. GM4035060Courtesy of GENERAL MOTORS COMPANY

    Install the transmission mount bracket bolt (1) and transmission mount bracket (2) and tighten to 22 N.m (16 lb ft).

  4. GM4035055Courtesy of GENERAL MOTORS COMPANY

    Connect the 2 engine master harness wiring harness retainer (1) and evaporative emission canister purge solenoid valve hose.

  5. Install the engine control module. Refer to Engine Control Module Replacement .
About FixVault