FixVault
Home › Chevrolet › 2020 › Traverse L › Repair and Diagnosis › Accessories & Equipment › Drivers Assistance Systems - ADAS › Driver Assistance Systems › Diagnostic Information and Procedures › DTC B094C › Circuit/System Verification

Circuit/System Verification

  1. Ignition - On/Vehicle - In Service Mode
  2. Verify DTC B094C is not set.
    • If the DTC is set 

      Replace the component: B218L Side Object Sensor Module - Left & B218R Side Object Sensor Module - Right

    • Go to next step: If the DTC is not set 
  3. All OK.
About FixVault