FixVault
Home › Chevrolet › 2020 › Traverse L › Repair and Diagnosis › Electrical › Body Electrical › Wiring Systems And Power Management - Repair Instructions › Repair Instructions › Fuse Block Replacement › Installation Procedure

Installation Procedure

  1. GM4734794Courtesy of GENERAL MOTORS COMPANY

    Fuse Block (1) - Install

  2. GM4734793Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Install and tighten the positive post connector nut (1) to 9N.m (80 lb in)

  3. GM4735395Courtesy of GENERAL MOTORS COMPANY

    Install and tighten the m8 fuse block wiring harness terminal and nut (1) [2x] to 16N.m (12 lb ft)

  4. GM4735393Courtesy of GENERAL MOTORS COMPANY

    Install and tighten the m6 fuse block wiring harness terminal and nut (1) [3x] to 9N.m (80 lb in)

  5. GM4734791Courtesy of GENERAL MOTORS COMPANY

    Install and tighten the fuse block wiring harness terminal and nut (1) [4x] to 9N.m (80 lb in)

  6. GM4734790Courtesy of GENERAL MOTORS COMPANY

    Body Wiring Harness Connector (1) - Install

  7. GM4734788Courtesy of GENERAL MOTORS COMPANY

    Fuse Block Cover (1) - Install

  8. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (KL9) .
About FixVault