FixVault
Home › Chevrolet › 2020 › Trax LS, AWD › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 1.4L (LUV) - Repair Instructions › Repair Instructions › Ignition Coil Replacement › Installation Procedure

Installation Procedure

  1. GM2579391Courtesy of GENERAL MOTORS COMPANY

    Install the EN-6009 remover/installer (1).

  2. Install the ignition coil assembly (2).
  3. Remove the EN-6009 remover/installer (1).
  4. GM2508825Courtesy of GENERAL MOTORS COMPANY

    Install the 2 ignition coil assembly fasteners (2) and tighten to 8 N.m (71 lb in).

  5. Connect the ignition coil plug (1).
  6. Install the engine cover. Refer to Engine Cover Replacement .
  7. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (without KL9) , and Battery Negative Cable Disconnection and Connection (with KL9) .
About FixVault