FixVault
Home › Chevrolet › 2021 › Blazer L › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.5L (LCV) - Repair Instructions › Repair Instructions › Engine Oil Pressure Sensor Replacement › Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. Remove the right front tire and wheel assembly. Tire and Wheel Removal and Installation
  3. GM4375295Courtesy of GENERAL MOTORS COMPANY

    Electrical Connector (1) - Disconnect

  4. GM4375606Courtesy of GENERAL MOTORS COMPANY

    Battery Negative Cable Ground Stud (1) - Remove

  5. Battery Cable (2) - Reposition
  6. GM4375489Courtesy of GENERAL MOTORS COMPANY

    Engine Oil Pressure Sensor (1) - Remove

About FixVault