FixVault

Tail Lamp Control Module Replacement

GM4533853Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedures 
Quarter Lower Rear Trim Panel–Left Side - Remove - Quarter Lower Rear Trim Panel Replacement
1 Tail Lamp Control Module Nut [ 2x ]
Tighten 
8 N.m (71 lb/in)
2 Tail Lamp Control Module Bracket
Procedure 
Slide the module bracket and remove it from the module.
3 Tail Lamp Control Module

Procedure

  1. Disconnect the electrical connector.
  2. Perform the necessary programming and setup procedure: Control Module References