Installation Procedure
- Windshield - Install - Adhesive Installation of Windshields
Multifunction Relay Module Bracket (1) - Install - Multifunction Relay Module Bracket Replacement (Without Front View Camera) , or Multifunction Relay Module Bracket Replacement (With Front View Camera)
Inside Rearview Mirror (2) - Install - Inside Rearview Mirror Replacement
{ If equipped } Inside Air Moisture and Windshield Temperature Sensor (2) - Remove - Inside Air Moisture and Windshield Temperature Sensor Replacement
{ If equipped } Front View Camera (1) - Install - Front View Camera Replacement
Windshield Multifunction Sensor Mount Bracket Cover (2) - Install - Windshield Multifunction Sensor Mount Bracket Cover Replacement (with Front View Camera) , or Windshield Multifunction Sensor Mount Bracket Cover Replacement (without Front View Camera)
Windshield Garnish Molding (1) - Install - Windshield Garnish Molding Replacement
Air Inlet Grille Panel (2) - Install - Air Inlet Grille Panel Replacement .
- Battery Negative Cable - Connect - Battery Negative Cable Disconnection and Connection
- Close the hood.
- Remove the double layer of masking tape around the perimeter of the painted surfaces.