Circuit/System Verification

Verify the component specifications are correct: Keyless Entry Transmitter = Correct part - Key Part Number
- If not correct
  Replace the component: Keyless Entry Transmitter Refer to: Remote Control Door Lock and Theft Deterrent Transmitter Programming
- Go to next step: If correct
Verify the scan tool parameter: Immobilizer Transponder Key = 2 or more
- If not correct
  Add/Replace Key Fobs - Keyless Entry Transmitter = 2 or more
- Go to next step: If correct
Replace the component: Keyless Entry Transmitter Refer to: Remote Control Door Lock and Theft Deterrent Transmitter Programming
Verify the scan tool procedure was successful. - Learn Mode Inactive
- If not the specified state
  Replace the component: K9 Body Control Module
- Go to next step: If the specified state
All OK.