Circuit/System Description

For an overview of the component/system, refer to: ABS Description and Operation

Circuit	Description
Signal	The control module input circuit has an internal resistance connected to 12 V.
Ground	Chassis Ground

Component	Description
K9 Body Control Module	The control module contains a microprocessor used to process input data to control outputs.
S48C Multifunction Switch 1 - Instrument Panel	When the traction control switch is pressed once, the BCM will request the EBCM via serial data to disable the traction control. When the switch is pressed for 5 s, the BCM will request the EBCM to disable the stability control. The EBCM will request the instrument cluster via serial data to turn the "Traction Control Off" and "Stability Control Off" indicators On to notify the driver of the deactivation. When the switch is pressed once more, the traction control and stability control will be activated again.

Component

Description

K9 Body Control Module

The control module contains a microprocessor used to process input data to control outputs.

S48C Multifunction Switch 1 - Instrument Panel

When the traction control switch is pressed once, the BCM will request the EBCM via serial data to disable the traction control. When the switch is pressed for 5 s, the BCM will request the EBCM to disable the stability control. The EBCM will request the instrument cluster via serial data to turn the "Traction Control Off" and "Stability Control Off" indicators On to notify the driver of the deactivation. When the switch is pressed once more, the traction control and stability control will be activated again.