Circuit/System Verification

Ignition - On/Vehicle - In Service Mode
Perform the scan tool control function: All Indicators Command - On and Off
- Traction/Stability Control Indicator = OFF
  Replace the component: P16 Instrument Cluster
- Go to next step: Traction/Stability Control Indicator = ON
Operate the component: S48C Multifunction Switch 1 - Instrument Panel - Active
Verify the scan tool parameter: Traction Control Switch @ K9 Body Control Module = Active
- If not the specified state
  Refer to: Circuit/System Testing
- Go to next step: If the specified state
All OK.