FixVault
Home › Chevrolet › 2021 › Bolt EV Premier › Repair and Diagnosis › External Pages › Different car › Section 45 (Hybrid/EV Controls System) › Repair Instructions › Drive Motor Power Inverter Module 3 Phase Cable Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2020 Chevrolet Bolt EV. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4529674Courtesy of GENERAL MOTORS COMPANY

    Drive Motor Power Inverter Module 3-Phase Cable (1) - Install

  2. GM4529673Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Drive Motor Power Inverter Module 3-Phase Cable Bolt (4) - Tighten [3x] 9 N.m (80 lb in)

  3. Drive Motor Power Inverter Module 3-Phase Cable Connector Cover Seal (3) - Install NEW
  4. Drive Motor Power Inverter Module 3-Phase Cable Connector Cover (2) - Install
  5. Drive Motor Power Inverter Module 3-Phase Cable Connector Cover Bolt (1) - Install [2x] 9 N.m (80 lb in)
  6. Drive Motor Rear Mount Bracket - Install - Drive Motor Rear Mount Bracket Replacement
  7. Enable the high voltage system. High Voltage Enabling
About FixVault