Fastener Specifications
Single Use Non-Threaded Fasteners/Components
| Application |
|---|
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
| Drive Motor Power Inverter Module 3-Phase Cable Connector Cover Seal |
Reusable Threaded Fastener Tightening Specifications
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
| Accelerator Pedal Pad Bolt | 7 N.m (62 lb/in) |
| Accessory DC Power Control Module Bolt | 22 N.m (16 lb-ft) |
| Accessory DC Power Control Module High Voltage Connector Protector Bolt | 9 N.m (80 lb/in) |
| Accessory DC Power Control Module High Voltage Connector Protector Bolt | 22 N.m (16 lb-ft) |
| Accessory DC Power Control Module High Voltage Connector Protector Nut | 9 N.m (80 lb/in) |
| Accessory DC Power Control Module Stud | 22 N.m (16 lb-ft) |
| Battery Negative Cable Extension Cable Nut | 15 N.m (11 lb-ft) |
| Battery Positive Cable and Nut | 15 N.m (11 lb-ft) |
| Drive Motor Power Inverter Module 3-Phase Cable Bolt | 9 N.m (80 lb/in) |
| Drive Motor Power Inverter Module 3-Phase Cable Connector Cover Nut | 9 N.m (80 lb/in) |
| Drive Motor Power Inverter Module 3-Phase Cable Connector Cover Bolt | 9 N.m (80 lb/in) |
| Drive Motor Power Inverter Module Bolt | 22 N.m (16 lb-ft) |
| Drive Motor Power Inverter Module Nut | 22 N.m (16 lb-ft) |
| Drive Motor Power Inverter Module Shield Bolt | 9 N.m (80 lb/in) |
| Drive Motor Power Inverter Module Shield Bolt | 25 N.m (18 lb-ft) |
| Engine Control Module Bracket Nut | 4.7 N.m (42 lb/in) |
| Engine Wiring Harness Bracket Bolt to Accessory DC Power Control Module | 22 N.m (16 lb-ft) |
| Generator Battery Control Wiring Junction Block Bolt | 22 N.m (16 lb-ft) |
| Generator Battery Control Wiring Junction Block Cover Lower Bolt | 2.5 N.m (22 lb/in) |
| Generator Battery Control Wiring Junction Block Cover Upper Bolt | 2.5 N.m (22 lb/in) |
| 15A Fuse Nut | 4.5 N.m (40 lb/in) |
| 40A Fuse Nut | 4.5 N.m (40 lb/in) |