Component Testing
- Ignition/Vehicle - Off
- Disconnect the electrical connector: M40 Rear Compartment Lid Latch
- Test for infinite resistance between the test points: Signal terminal 4 & Ground terminal 2 - The switch is in the open position.
- If less than infinite resistance
Replace the component: M40 Rear Compartment Lid Latch
- Go to next step: If infinite resistance
- If less than infinite resistance
- Test for less than 3 ohms between the test points: Signal terminal 4 & Ground terminal 2 - The switch is in the closed position.
- If 3 ohms or greater
Replace the component: M40 Rear Compartment Lid Latch
- Go to next step: If less than 3 ohms
- If 3 ohms or greater
- All OK.