FixVault
Home › Chevrolet › 2021 › Corvette 2D Convertible › Repair and Diagnosis › Body & Frame › Fixed And MOVEABLE Windows › Repair Instructions › Rear Sliding Window Replacement › Removal Procedure

Removal Procedure

  1. GM5630552Courtesy of GENERAL MOTORS COMPANY

    Quarter Window Trim Finish Panel (1) - Remove [2x] - Quarter Window Trim Finish Panel Replacement (Coupe) , or Quarter Window Trim Finish Panel Replacement (Convertible)

  2. GM5640933Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Using a grease pencil, outline the position of each of the folding top rear latch strikers to add installation.

    Folding Top Front Latch Stowage Striker Nut (1) - Remove [4x]

  3. Folding Top Front Latch Stowage Striker (2) - Remove [2x]
  4. GM5634802Courtesy of GENERAL MOTORS COMPANY

    Rear Sliding Window Motor Cover (1) - Remove

  5. GM5882971Courtesy of GENERAL MOTORS COMPANY

    Disconnect the rear sliding window motor electrical connector (1).

  6. Reposition the rear sliding window motor wire harness.
  7. GM5640934Courtesy of GENERAL MOTORS COMPANY

    Rear Sliding Window Bolt (1) - Remove [4x]

  8. GM5640935Courtesy of GENERAL MOTORS COMPANY

    Disconnect the electrical connector.

  9. Rear Sliding Window (1) - Remove
About FixVault