Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Transmission Fluid Cooler Pipe Fitting Retainer |
| Transmission Fluid Cooler Pipe Fitting Seal |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Oil Cooler Line Flare Nut @ Radiator |
45 N.m (33 lb ft) |
| Transmission Cooler Line Bracket Bolt (6L90 MYD) |
22 N.m (16 lb ft) |
| Transmission Fluid Auxiliary Cooler Bolts | 11 N.m (8 lb ft) |
| Transmission Fluid Cooler Pipe Bolt | 22 N.m (16 lb ft) |
| Transmission Fluid Cooler Pipe Clip Bolt @ Engine Block (near front of engine block) | 9 N.m (80 lb in) |
| Transmission Fluid Cooler Pipe Clip Bolt @ Engine Block (near rear of engine block) | 35 N.m (310 lb in) |