FixVault
Home › Chevrolet › 2021 › Malibu LS › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Diagnostic Information and Procedures › Traction Control/Stability Control Indicator Malfunction › Component Testing

Component Testing

  1. Ignition/Vehicle - Off
  2. Disconnect the electrical connector: S48E Multifunction Switch - Center Console
  3. Test for infinite resistance between the test points: Signal terminal 7 & Ground terminal 2 - The switch is in the open position.
    • If less than infinite resistance 

      Replace the component: S48E Multifunction Switch - Center Console

    • Go to next step: If infinite resistance 
  4. Test for less than 2 ohms between the test points: Signal terminal 7 & Ground terminal 2 - The switch is in the closed position.
    • If 2 ohms or greater 

      Replace the component: S48E Multifunction Switch - Center Console

    • Go to next step: If less than 2 ohms 
  5. All OK.
About FixVault