Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Using a suitable plastic trim tool, gently pry upwards to release the retaining clips.
Front Seat Adjuster Track Finish Cover (1) - Remove

Courtesy of GENERAL MOTORS COMPANY
Starting at the rear of the garnish molding (1), pull upward at the B-Pillar joint to release the up/down clips first.
Rotate the sill garnish molding (1) inboard after releasing up/down clips and pull rearward to disengage the two clips on the forward vertical wall.
Front Side Door Sill Garnish Molding (1) - Remove

Courtesy of GENERAL MOTORS COMPANY
Disconnect the electrical connectors.
Release the retaining tabs.
Keyless Entry Control Module (1) - Remove