Fastener Specifications
Single Use Threaded Fastener/Component Tightening Specifications
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
| Drivetrain and Front Suspension Crossmember Rear Bolt | |
|
140 N.m (103 lb ft) |
|
60 - 75 Degrees |
Reusable Threaded Fastener Tightening Specifications
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
| Differential Carrier Rear Bolt | 100 N.m (74 lb ft) |
| Drivetrain and Front Suspension Crossmember Extension Front Bolt | |
|
90 N.m (66 lb ft) |
|
30 - 45 Degrees |
| Drivetrain and Front Suspension Crossmember Front Bolt | |
|
90 N.m (66 lb ft) |
|
30 - 45 Degrees |
| Front Compartment Insulator Bolt | 2.5 N.m (25 lb in) |
| Front Wheelhouse Liner Bolt | 2.5 N.m (25 lb in) |
| Radiator Lower Bracket Bolt | 22 N.m (16 lb ft) |
| Rear Front Bumper Extension Retaining Bolt | 2.5 N.m (25 lb in) |
| Rear Suspension Frame Bolt | 100 N.m (74 lb ft) |
| Rear Tire Front Air Deflector Bolt | 2.5 N.m (25 lb in) |
| Rear Wheelhouse Liner Bolt | 2.5 N.m (25 lb in) |
| Transmission Mount Strut Bolt - PT side | |
|
100 N.m (74 lb ft) |
|
60 - 75 Degrees |