Removal Procedure
Front Floor Console Extension Panel - Left Side (1) - Remove - Front Floor Console Extension Panel Replacement - Left Side
Front Floor Console Extension Panel - Right Side (1) - Remove - Front Floor Console Extension Panel Replacement - Right Side
Front Floor Console (1) - Remove - Front Floor Console Replacement
- Remove the left and right windshield garnish molding. Windshield Garnish Molding Replacement
Remove the left and right instrument panel outer trim cover (1). Instrument Panel Outer Trim Cover Replacement
Instrument Panel Extension (1) - Remove - Instrument Panel Extension Replacement
Radio Front Center Speaker (2) - Remove - Radio Front Center Speaker Replacement
Remove the left and right radio front speaker (2). Radio Front Speaker Replacement
Instrument Panel Trim Pad - Left Side (1) - Remove - Instrument Panel Trim Pad Replacement - Left Side
Instrument Panel Trim Pad - Right Side (1) - Remove - Instrument Panel Trim Pad Replacement - Right Side
- Instrument Panel Radio Front Trim Plate - Remove - Instrument Panel Radio Front Trim Plate Replacement (IOR) , or Instrument Panel Radio Front Trim Plate Replacement (IOS, IOT)
Heater and Air Conditioning User Interface Control (2) - Remove - Heater and Air Conditioning User Interface Control Replacement
Instrument Panel Knee Bolster (1) - Remove - Instrument Panel Knee Bolster Replacement
Instrument Panel Compartment Door Opening Frame (1) - Remove - Instrument Panel Compartment Door Opening Frame Replacement
- Radio Control Assembly - Remove - Radio Control Assembly Replacement (IOS, IOT)
Instrument Cluster (2) - Remove - Instrument Cluster Replacement
Disconnect and reposition harness as necessary.
- Instrument Panel Bolt (1) - Remove [ 5x ]
Instrument Panel Bolt (1) - Remove [ 5x ]
Instrument Panel Bolt (1) - Remove [ 5x ]
Instrument Panel Bolt (1) - Remove [ 6x ]
Instrument Panel Airbag Bolt (1) - Remove [ 2x ]
Instrument Panel Airbag Bolt (1) - Remove
- Disconnect the instrument panel airbag electrical connector from the instrument panel harness.(2)
Release the locator stud (1) and tie bar bracket tab (2) on both sides of the instrument panel.
Instrument Panel (1) - Remove
- Note the location and routing of the wiring harness to ensure proper reinstallation.
- With the aid of an assistant, lift the instrument panel (1) rearward and upward from the instrument panel tie bar.