Removal Procedure

WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Lifting and Jacking the Vehicle
Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation
Courtesy of GENERAL MOTORS COMPANY

Remove the brake hose fitting bolt (1) from the front suspension strut bracket and reposition the front brake hose.
Courtesy of GENERAL MOTORS COMPANY

Remove the front wheel speed sensor harness retainer (1) from the front suspension strut bracket.
Courtesy of GENERAL MOTORS COMPANY

Front Stabilizer Shaft Link Nut- Upper (1) @ Front Suspension Strut - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Support the front steering knuckle assembly to prevent over-articulation of the ball joints.

Steering Knuckle Nut (1) - Remove [2x]
Steering Knuckle Bolt (2) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Front Suspension Strut Bumper Stop (1) - Remove
Front Suspension Mount Upper Cup (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Suspension Strut Upper Mounting Nut (1) - Remove [3x]
Courtesy of GENERAL MOTORS COMPANY

Front Suspension Strut (1) - Remove