FixVault

Installation Procedure

WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connectors.
  2. GM5423237Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Compartment (1) - Install

  3. GM5423236Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Instrument Panel Compartment Bolt (1) - Install and tighten [ 5x ] - Fastener Specifications 

  4. GM5443248Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

  5. Instrument Panel Lower Airbag - Passenger Side (2) - Install
  6. Instrument Panel Lower Airbag Nut (1) - Install and tighten [ 2x ] - Fastener Specifications
  7. GM5312734Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connectors.

  8. Instrument Panel Lower Trim Panel Insulator (1) - Install
  9. Install the front edge of the front floor console extension panel into the instrument panel lower trim panel insulator (1).
  10. GM5312733Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Insulator Bolt (1) - Install and tighten [ 4x ] - Fastener Specifications 

  11. GM5312731Courtesy of GENERAL MOTORS COMPANY

    Unlock and lower the body control module bracket (2).

  12. Connect the electrical connectors.
  13. Close and lock the body control module bracket (2) into the instrument panel lower trim panel insulator.
  14. Body Control Module Bracket Bolt (1) - Install and tighten - Fastener Specifications
  15. GM5421737Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Outer Trim Cover - Right Side (1) - Install

  16. Enable the SIR System. SIR Disabling and Enabling .
  17. Clear DTCs