Installation Procedure
WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Front Side Door Regulator (1) - Install
- CAUTION:
Refer to Fastener Caution .
Front Side Door Window Regulator Bolt (1) - Tighten [ 5x ] - Fastener Specifications
- Connect the electrical connector.
Place the window regulator in the full up position until window is seated into the front side door window regulator sash clamp.
- Front Side Door Window Regulator Sash Clamp Nut (1) - Tighten [ 2x ] - Fastener Specifications
Front Side Door Access Hole Plug (1) - Install
- Remove the tape.
- Inspect the door window for proper operation before installing the door trim panel.
- NOTE:
When reinstalling water deflector ensure integral locators are installed properly and that water deflector is secured and leakproof.
Route front side door inside handle cable through hole in deflector (1).
- Front Side Door Water Deflector (1) - Install
- Front Side Door Trim - Install - Front Side Door Trim Removal and Installation
- Supplemental Inflatable Restraint System Description and Operation
- Perform the necessary programming and setup procedure:Window Motor Programming - Express Function