Removal Procedure

WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Place a clean suitable drain pan under the windshield washer solvent container to recover the windshield washer solvent.
Courtesy of GENERAL MOTORS COMPANY

Windshield Washer Solvent Container Filler Tube Bracket Bolt (1) - Remove
While twisting, pull inboard on the windshield washer solvent container filler tube (2) to remove it from the windshield washer solvent container grommet.
Remove the right front tire and wheel assembly. Tire and Wheel Removal and Installation
Courtesy of GENERAL MOTORS COMPANY
NOTE:
- Quantity of retainers may vary based on option content.
- Components removed for graphic clarity.
Engine Front Splash Shield Retainer (1) - Remove [2x]
Engine Front Splash Shield Bolt (2) - Remove [5x]
Engine Front Splash Shield(3) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Remove only the outer front tire front air deflector bolt. The front tire front air deflector will be removed with the front wheelhouse liner.

Front Tire Front Air Deflector Bolt (1) - Remove
Front Bumper Fascia Air Deflector Bolt (2) - Remove [2x]
Front Wheelhouse Liner Bolt(3) - Remove [3x]
Courtesy of GENERAL MOTORS COMPANY

Front Wheelhouse Liner Retainer (1) - Remove [4x]
Front Wheelhouse Liner Bolt (2) - Remove [7x]
Front Wheelhouse Liner(3) - Remove
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connectors.
Release the windshield washer solvent container wiring harness retainers (1) and reposition the windshield washer solvent container wiring harness as necessary.
Windshield Washer Pump Hose (2) - Disconnect and reposition
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Support the windshield washer solvent container while removing the windshield washer solvent container bolts.

Windshield Washer Solvent Container Bolt (1) - Remove [2x]
Windshield Washer Solvent Container (2) - Remove