FixVault

Circuit/System Verification

WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition/Vehicle - Off
  2. Brake Pressure Modulator Valve=Ambient Air Temperature
  3. Ignition - On / Vehicle - In Service Mode
  4. Under normal operating conditions:Verify DTC C05C2 is not set.
    • If the DTC sets 

      Replace the component:K160 Brake System Control Module

    • Go to next step: If the DTC is not set 
  5. All OK.